All Purpose Sealer

A pure acrylic medium with remarkable adhesive qualities. All Purpose Sealer can be mixed with all Jo Sonja Artists' Colors and Jo Sonja Background Colors.

Maximum adhesion develops over time. Under normal conditions, product is 80% cured in 24 hours and 100% cured in 2 weeks.

Clean up with mild soap and cool water. .

">

JJ3608 All Purpose Sealer 2oz. - $2.13
JJ3708 All Purpose Sealer 8oz. - $6.45
JJ3758 All Purpose Sealer 16oz. - $11.18

<% '''''''''''''''''''''''''''''''''''''''''''''''''''' %> <% ' BEGIN ASP Hook Code Block - Do not edit this block %>

graphics/addtocart.jpg" border="0" width="100" height="40" name="function" alt="Add To Cart" value="Add">

<% If InStr (1, Request.ServerVariables ("HTTP_REFERER"), "/shop/") OR (InStr (1, Request.ServerVariables ("HTTP_REFERER"), Request.ServerVariables ("SCRIPT_NAME")) AND Session ("FromShopFlag") = 1) Then If InStr (1, Request.ServerVariables ("HTTP_REFERER"), "/shop/") Then Session ("FromShopFlag") = 1 Session ("ReturnPath") = Request.ServerVariables ("HTTP_REFERER") End If %> "> graphics/backtocart.jpg" border="0" width="100" height="40" alt="Back to cart"> <% Else Session ("FromShopFlag") = 0 Session ("ReturnPath") = "" End If If UBound (Session ("UsersBasket"), 2) > 0 Then %> ReviewBasket.asp"> graphics/reviewcart.jpg" width=100 height=40> <% End If %>

<% ' END ASP Hook Code Block - Do not edit this block '''''''''''''''''''''''''''''''''''''''''''''''''''' %>

All Purpose Sealer for Wood

1. All Purpose Sealer is an extremely hard sealer which leaves wood with an almost impenetrable seal. All Purpose Sealer is not recommended for wood that will be stained. Apply a coat of Clear Glazing Medium to seal before staining. This will insure an even application of stain.

2. One Step Basecoating: No need to sand first. Mix All Purpose Sealer with desired colour 1:1. Apply with criss-cross strokes before smoothing in the direction of wood grain. Sand when dry and apply second coat without addition of sealer, if desired. Flow Medium can be added to eliminate brush strokes.

All Purpose Sealer for Metal or Tin

1. Shiny tin should be scuffed with medium grit sandpaper. The objective is to provide a "tooth" to the surface for proper adhesion. The surface should be free from dirt, oils and rust.

2. Apply All Purpose Sealer undiluted using a sponge or soft fibered brush. Allow sealer to harden at least overnight before proceeding. You may quick set by preheating oven to 200 degrees, turn oven off and place item in oven. Close oven door and allow piece to cool in oven. Maximum hardening only develops over time. Additional All Purpose Sealer may be mixed with your first basecoat colour 1:1 for added durability.

All Purpose Sealer for Ceramic Surfaces

1. Unglazed Bisque: No pre-sanding required. Mix All Purpose Sealer into desired Jo Sonja's Artist Colour approximately 1:1 and proceed with decorating. May increase the gloss level of the paint. No finish is required.

2. Glazed or Non-Porous Surface: Apply undiluted over the entire surface or just under design area. Allow to dry. Decorate as desired. When dry, varnish if desired.

3. Glass or Tile: For maximum adhesion to glass, tiles and non-porous surfaces Jo Sonja's Glass & Tile Primer and Medium are recommended.

.

All Purpose Sealer is an extremely hard sealer which leaves wood with an almost impenetrable seal.

All Purpose Sealer can be used to prepare most metallic surfaces - both old and new. For more information on painting on metals see the books Painted Tin Vol. 1 & Painted Tin Vol. 2

These designs were all done using Jo Sonja's All Purpose Sealer to prepare the variety of surfaces JP1091 - Large Mouth Bass JP1096 - Victorian Florals - Tin JP1067 - Victorian Ladies JP1125 - Stitcher's Garden

Copyright © 2002 Jo Sonja ®
Jo Sonja's Inc. - P.O. Box 9080 - Eureka, CA 95501
Phone: (707) 445-9306 - Toll Free: (888) JOSONJA

Web site designed by Bethany Jansen, Mark Jansen, & Matt Basham
email: For Technical Support